IEI Technology PM-PV-D4251 User Manual Download Page 93

Page: 93 / 141

PM-PV-D4251/N4551/D5251 User Manual

Page 81

Bootup NumLock State [On]

Use the

Bootup NumLock State

BIOS option to specify if the number lock setting must

be modified during boot up.

On D

EFAULT

Allows the Number Lock on the keyboard to be

enabled automatically when the computer system

boots up. This allows the immediate use of the

10-key numeric keypad located on the right side of

the keyboard. To confirm this, the Number Lock LED

light on the keyboard is lit.

Off

Does not enable the keyboard Number Lock

automatically. To use the 10-keys on the keyboard,

press the Number Lock key located on the upper

left-hand corner of the 10-key pad. The Number

Lock LED on the keyboard lights up when the

Number Lock is engaged.

Quiet Boot [Enabled]

Use the

Quiet Boot

BIOS option to select the screen display when the system boots.

Disabled

Normal POST messages displayed

Enabled D

EFAULT

OEM Logo displayed instead of POST messages

Launch PXE OpROM [Disabled]

Use the

Launch PXE OpROM

option to enable or disable boot option for legacy network

devices.

Disabled D

EFAULT

Ignore all PXE Option ROMs

Enabled

Load PXE Option ROMs.

5.6 Security

Use the

Security

menu (

BIOS Menu 17

) to set system and user passwords.

Summary of Contents for PM-PV-D4251














































































































































Search results

Summary of Contents for PM-PV-D4251

Reviews:

Related manuals for PM-PV-D4251

Brands by name

Popular brands

IEI Technology PM-PV-D4251, User Manual

Search results

Summary of Contents for PM-PV-D4251

Reviews:

Related manuals for PM-PV-D4251

Brands by name

Popular brands