IEI Technology PM-PV-D4251 User Manual Download Page 109

Page: 109 / 141

PM-PV-D4251/N4551/D5251 User Manual

Page 97

B.2.4 Build-up Recovery Partition

Step 1:

Put the recover CD in the optical drive.

Step 2:

Start the system.

Step 3:

Boot the system from recovery CD

. When prompted, press any key to boot

from the recovery CD. It will take a while to launch the recovery tool. Please be

patient!

Figure B-6: Launching the Recovery Tool

Step 4:

When the recovery tool setup menu appears, press <

> then <Enter>.

Figure B-7: System Configuration for Windows

Step 5:

The Symantec Ghost window appears and starts configuring the system to

build-up a recovery partition. In this process, the partition which is created for

Summary of Contents for PM-PV-D4251














































































































































Search results

Summary of Contents for PM-PV-D4251

Reviews:

Related manuals for PM-PV-D4251

Brands by name

Popular brands

IEI Technology PM-PV-D4251, User Manual

Search results

Summary of Contents for PM-PV-D4251

Reviews:

Related manuals for PM-PV-D4251

Brands by name

Popular brands