IEI Technology PICOe-HM650 User Manual Download Page 76

Page: 76 / 174

PICOe-HM650 Half-size PCIe CPU Card

Page 62

4.5 Chassis Installation

4.5.1 Airflow

WARNING:

Airflow is critical to the cooling of the CPU and other onboard

components. The chassis in which the PICOe-HM650 must have air

vents to allow cool air to move into the system and hot air to move out.

The PICOe-HM650 must be installed in a chassis with ventilation holes on the sides

allowing airflow to travel through the heat sink surface. In a system with an individual

power supply unit, the cooling fan of a power supply can also help generate airflow

through the board surface.

4.5.2 Backplane Installation

Before the PICOe-HM650 can be installed into the chassis, a backplane must first be

installed. Please refer to the installation instructions that came with the backplane and the

chassis to see how to install the backplane into the chassis.

NOTE:

IEI has a wide range of backplanes available. Please contact your

PICOe-HM650 vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

4.5.3 CPU Card Installation

To install the PICOe-HM650 CPU card onto the backplane, carefully align the CPU card

interface connectors with the corresponding socket on the backplane. To do this, please

refer to the reference material that came with the backplane. Next, secure the CPU card to

the chassis. To do this, please refer to the reference material that came with the chassis.

Summary of Contents for PICOe-HM650















































































































































































Search results

Summary of Contents for PICOe-HM650

Reviews:

Brands by name

Popular brands

IEI Technology PICOe-HM650, User Manual

Search results

Summary of Contents for PICOe-HM650

Reviews:

Brands by name

Popular brands