manualshive.com logo in svg

IEI Technology PICOe-HM650, User Manual

Share
Download
IEI Technology PICOe-HM650 User Manual Download Page 124

 

 

PICOe-HM650 Half-size PCIe CPU Card

Page 110 

The detailed descriptions are described in the following sections.   

 NOTE: 

The setup procedures described below are for Microsoft Windows 

operating system users. For Linux, most of the setup procedures are 

the same except for several steps described in 

Section B.3

. 

B.2.1 Hardware and BIOS Setup 

Step 1: 

Make sure the system is powered off and unplugged. 

Step 2: 

Install a hard drive or SSD in the system. An unformatted and unpartitioned disk 

is recommended.   

Step 3: 

Connect an optical disk drive to the system and insert the recovery CD. 

Step 4: 

Turn on the system. 

Step 5: 

Press the <

DELETE

> key as soon as the system is turned on to enter the BIOS. 

Step 6: 

Select the connected optical disk drive as the 1

st

 boot device. (

Boot

 

Æ

 

Boot 

Device Priority

 

Æ

 

1

st

 Boot Device

). 

Step 7: 

Save changes and restart the computer. Continue to the next section for 

instructions on partitioning the internal storage.

  

S

te

p

 0

:

 

B.2.2 Create Partitions 

To create the system backup, the main storage device must be split into two partitions 

(three partitions for Linux). The first partition will be for the operating system, while the 

second partition will be invisible to the operating system and contain the backup made by 

the one key recovery software. 

Step 1: 

Put the recovery CD in the optical drive of the system.   

Summary of Contents for PICOe-HM650















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands