IEI Technology PCISA-MARK User Manual Download Page 217

Page: 217 / 224

PCISA-MARK CPU Card

E.4.4 Stripe Size

Changing the stripe size effects RAID 0 arrays. Configurable options are:

64K (default)

32K

16K

Select a small stripe size if the I/Os to the hard drives are small and occur randomly.

Choose a larger stripe size if the I/Os are mostly large and come in sequential orders, e.g.,

A/V playback and editing applications. The default value should be appropriate for most

applications.

E.4.5 Delete RAID Setting & Partition

WARNING!

If a RAID configuration is deleted, all data previously stored on

the member drives of the RAID configuration will also be

deleted.

Step 1:

Step 2:

Delete a RAID setting

. Use the arrow keys to highlight

Delete RAID Setting &

Partition

and press

NTER

. A flashing ‘E’ appears at the

Drive Menu

where the

member drives to be removed can be chosen.

Confirm Delete

. The

Data on RAID drives will be erased (Y/N)

confirm box

appears. Press

Step 0:

Page 217

Summary of Contents for PCISA-MARK

































































































































































































































Search results

Summary of Contents for PCISA-MARK

Reviews:

Related manuals for PCISA-MARK

Brands by name

Popular brands

IEI Technology PCISA-MARK, User Manual

Search results

Summary of Contents for PCISA-MARK

Reviews:

Related manuals for PCISA-MARK

Brands by name

Popular brands