IEI Technology PCISA-MARK User Manual Download Page 115

Page: 115 / 224

PCISA-MARK CPU Card

Extended Memory

The

Extended Memory

is NOT user configurable. The BIOS determines how much

extended memory is present during the POST. This is the amount of memory above 1MB

located in the memory address map of the CPU.

Total Memory

The

Total Memory

is NOT user configurable.

5.2.1 IDE Primary Master/Slave

Use the

IDE Primary Master/Slave

menu (

BIOS Menu 3

) to set or change the

master/slave IDE configurations.

BIOS Menu 3: IDE Primary Master

IDE HDD Auto-Detection [Press Enter]

Use the

IDE HDD Auto-Detection

option to enable BIOS to automatically detect the IDE

settings. Select

IDE HDD Auto-Detection

and press

NTER

BIOS automatically detects

the HDD type. Do not set this option manually.

Page 115

Summary of Contents for PCISA-MARK

































































































































































































































Search results

Summary of Contents for PCISA-MARK

Reviews:

Related manuals for PCISA-MARK

Brands by name

Popular brands

IEI Technology PCISA-MARK, User Manual

Search results

Summary of Contents for PCISA-MARK

Reviews:

Related manuals for PCISA-MARK

Brands by name

Popular brands