manualshive.com logo in svg

IEI Technology PCIE-Q57A, User Manual, Page: 131 / 159

Share
Download
IEI Technology PCIE-Q57A User Manual Download Page 131

 

 

PCIE-Q57A PICMG 1.3 CPU Card 

Page 119

C.2.5 Create Factory Default Image 

 NOTE: 

Before creating the factory default image, please configure the system 

to a factory default environment, including driver and application 

installations.  

To create a factory default image, please follow the steps below.   

Step 1: 

Turn on the system. When the following screen displays (

77

Figure A-2

), press the 

<

F3

> key to access the recovery tool. The message will display for 10 seconds, 

please press F3 before the system boots into the operating system. 

 

Figure C-10: Press F3 to Boot into Recovery Mode 

Step 2: 

The recovery tool menu appears. Type <

4

> and press <

Enter

>. (

77

Figure A-3

) 

 

Figure C-11: Recovery Tool Menu 

Step 3: 

The About Symantec Ghost window appears. Click 

OK

 button to continue. 

Summary of Contents for PCIE-Q57A
































































































































































Reviews:

No comments