IEI Technology PCIE-H610 User Manual Download Page 102

Page: 102 / 140

PCIE-H610 PICMG 1.3 CPU Card

Page 89

Resume on PCIE Wake [Enabled]

Use the

Resume on PCIE Wake

option to enable or disable resuming from the PCIe

wake message and WAKE# signal.

Disabled

Disables Resume on PCIe Wake option

Enabled D

EFAULT

Enables Resume on PCIe Wake option

Resume on PME/GbE [Enabled]

Use the

Resume on PME/GbE

option to enable or disable resuming from PCI PME# or

GbE signal.

Disabled

Disables Resume on PCI PME/GbE option

Enabled D

EFAULT

Enables Resume on PCI PME/GbE option

Resume on Ring [Enabled]

Use the

Resume on Ring

option to enable or disable resuming from RI# signal.

Disabled

Disables Resume on Ring option

Enabled D

EFAULT

Enables Resume on Ring option

Resume on PS/2 [Enabled]

Use the

Resume on PS/2

option to enable or disable resuming from PS/2 activation.

Disabled

Disables Resume on PS/2 option

Enabled D

EFAULT

Enables Resume on PS/2 option

Azalia HD Audio [Enabled]

Use the

Azalia HD Audio

option to enable or disable the High Definition Audio controller.

Disabled

The onboard High Definition Audio controller is disabled

Enabled D

EFAULT

The onboard High Definition Audio controller is detected

automatically and enabled

Summary of Contents for PCIE-H610













































































































































Search results

Summary of Contents for PCIE-H610

Reviews:

IEI Technology PCIE-H610, User Manual, Page: 102 / 140

Search results

Summary of Contents for PCIE-H610

Reviews: