IEI Technology PCIE-H610, User Manual

Page: 85 / 140

PCIE-H610 PICMG 1.3 CPU Card
Page 72
5.3.7.1 Floppy Disk Controller Configuration
Use the Floppy Disk Controller Configuration menu ( BIOS Menu 12 ) to configure the
floppy disk controller.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
Floppy Disk Controller Configuration
Floppy Disk Controller [Enabled]
Device Settings Reset Required
Change Settings
[Auto]
Device Mode [Read Write]
Enable or Disable Floppy
Disk Controller
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 11: Serial Port n Configuration Menu
Î
Floppy Disk Controller [Enabled]
Use the Floppy Disk Controller option to enable or disable the floppy disk controller.
Î
Disabled Floppy disk controller disabled
Î
Enabled D
EFAULT
Floppy disk controller enabled
Î
Change Settings [Auto]
Use the Change Settings option to change the super IO device address and interrupt
address.
Î
Auto D
EFAULT
The super IO device address and interrupt address
are automatically detected.
Î
IO=3F8h;
IRQ=6;
DMA=2
The super IO device address is 3F8h, interrupt
address is IRQ6 and DMA channel is DMA2