PAC-1700G QIG IEI Technology Corp. Page 9
Figure 29: Fan Retention Screws
Step 5:
Install a new fan and reinsert the four previously
removed fan retention screws to secure the fan to the
front panel.
Step 6:
Reinstall the front panel frame and reinsert the four
previously removed front panel frame retention screws.
Step 7:
Reinstall the fan filter cover and close the front panel
cover.
F
AN
F
ILTER
R
EPLACEMENT
To replace the fan filter, please follow the steps below:
Step 1:
Flip open the fan filter cover.
Figure 30: Open the Fan Filter Cover
Step 2:
Replace the fan filter pad inside.
Step 3:
Reinstall the fan filter cover.
C
ABINET
I
NSTALLATION
Supporting rails, rack trays, or slide rails can be installed using the
mounting holes on the sides of the chassis. The four mounting holes
in the two wall-mount plates, two in each wall-mount plate, are
shown below.
Figure 31: Wall Mounting Holes
NOTE:
If the system is running critical applications, please find appropriate
time to backup data and properly shut down the system.
