IEI Technology NOVA-PV-D5251 User Manual Download Page 150

Page: 150 / 194

NOVA-PV-D5251/D4251 5.25" SBC

Page 134

NOTE:

Use the following commands to check if the partitions were created

successfully.

Step 6:

Press any key to exit the recovery tool and automatically reboot the system.

Please continue to the following procedure: Build the Recovery Partition.

B.2.3 Install Operating System, Drivers and Applications

Install the operating system onto the unlabelled partition. The partition labeled "Recovery"

is for use by the system recovery tool and should not be used for installing the operating

system or any applications.

NOTE:

The operating system installation program may offer to reformat the

chosen partition. DO NOT format the partition again. The partition has

already been formatted and is ready for installing the new operating

system.

To install the operating system, insert the operating system installation CD into the optical

drive. Restart the computer and follow the installation instructions.

Summary of Contents for NOVA-PV-D5251



































































































































































































Search results

Summary of Contents for NOVA-PV-D5251

Reviews:

Related manuals for NOVA-PV-D5251

Brands by name

Popular brands

IEI Technology NOVA-PV-D5251, User Manual

Search results

Summary of Contents for NOVA-PV-D5251

Reviews:

Related manuals for NOVA-PV-D5251

Brands by name

Popular brands