IEI Technology NOVA-PV-D5251 User Manual Download Page 131

Page: 131 / 194

NOVA-PV-D5251/D4251 5.25" SBC

Page 115

Enabled D

EFAULT

The onboard High Definition Audio controller

automatically detected and enabled

Disabled

The onboard High Definition Audio controller is disabled

USB Function [Enabled]

Use the

USB Function

BIOS option to enable or disable USB function support.

Disabled

USB function support disabled

Enabled D

EFAULT

USB function support enabled

USB 2.0 (EHCI) Support [Enabled]

Use the

USB 2.0 (EHCI) Support

BIOS option to enable or disable the USB 2.0 controller

Enabled D

EFAULT

USB 2.0 controller enabled

Disabled

USB 2.0 controller disabled

Set Spread Spectrum function [Disabled]

Use the

Set Spread Spectrum function

option to reduce the EMI. Excess EMI is

generated when the system clock generator pulses have extreme values. Spreading the

pulse spectrum modulates changes in the extreme values from spikes to flat curves, thus

reducing the EMI. This benefit may in some cases be outweighed by problems with

timing-critical devices, such as a clock-sensitive SCSI device.

Disabled D

EFAULT

EMI not reduced

Enabled

EMI reduced

Summary of Contents for NOVA-PV-D5251



































































































































































































Search results

Summary of Contents for NOVA-PV-D5251

Reviews:

Brands by name

Popular brands

IEI Technology NOVA-PV-D5251, User Manual

Search results

Summary of Contents for NOVA-PV-D5251

Reviews:

Brands by name

Popular brands