45
Appendix C: ATX Power Supply
The following notes show you how to connect ATX Power Supply.
For backplanes with ATX Connector
1.
Disconnect the AC cord of the Power Supply from the AC source to prevent
sudden electric surge to the board.
2.
Check the type of your Power Supply and find out +5VSB,PS-ON & GND.
NOVA-8890 (through Power Button & GND):
Connect the ATX power button switch to the CN7 (power button). Then connect
the power cable from power supply. To turn ON the system, press the button
once. To turn off the power supply, hold down the ATX power switch button for
about 4 seconds.
