39
4.9 Peripheral Setup Selections
AMIBIOS SETUP – PERIPHERAL SETUP
©2001 American Megatrends, Inc. All Rights Reserved
OnBoard Serial Port C 3E8/COM3
Serial Port C IRQ 11
OnBoard Serial Port D 2E8/COM4
Serial Port D IRQ 10
OnBoard FDC Enabled
OnBoard Serial Port A 3F8/COM1
OnBoard Serial Port B 2F8/COM2
Serial Port B Mode Normal
IR Duplex Mode Half Duplex
IR Pin Select IRRX/IRIX
OnBoard Parallel Port 378
Paralled Port Mode Normal
EPP Version N/A
Parallel Port IRQ 3
Parallel Port DMA Channel N/A
On-Chip IDE Both
Available Options:
Disabled
3F8/COM1
2F8/COM2
> 3E8/COM3
2E8/COM4
ESC: Exit
↑↓
: Sel
PgUp/PgDn: Modify
F1: Help
F2/F3: Color
Figure 7: Peripheral Setup
OnBoard FDC
Set this option to Enabled to activate the floppy drive controller on
the motherboard. The settings are Auto (AMIBIOS automatically
determines if the floppy controller should be enabled), Enabled, or
Disabled.
OnBoard Serial Port A/B
This option specifies the base I/O port address of serial port A. The
settings are Auto (AMIBIOS automatically determines the correct
base I/O port address), Disabled, 3F8h, 2F8h, 2E8h, or 3E8h.
OnBoard Parallel Port
This option specifies the base I/O port address of parallel port on the
motherboard. The settings are Disabled, 378h, 278h, or 3BCh.