NAS-4300S NETWORK ATTACHED STORAGE SERVICE MANUAL
Firmware Reinstallation Procedure
The following instructions show how to reinstall the firmware on a NAS-4300S.
Before performing the firmware reinstallation procedure, please have the
service kit and a CD-ROM drive with the IDE cable ready on hand.
To reinstall the firmware on the NAS-4300S, please connect the console cables
to the NAS-4300S main board (refer to the Appendix B).
1.
Turn off the power and remove the top cover.
Note: Refer to the “Disassembly Guide” for removing the top cover.
2.
Connect the CD-ROM drive to the 40-pin IDE port on the main board via the
IDE cable. Then connect the power of the CD-ROM drive to the main board.
IEI CONFIDENTIAL
23
