IEI Technology NANO-LX2, User Manual

Page: 77 / 183

NANO-LX2 EPIC NANO Motherboard
Page 61
5.2.3 SO-DIMM Installation
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the NANO-LX2. Please make sure the purchased SO-DIMM complies
with the memory specifications of the NANO-LX2. SO-DIMM
specifications compliant with the NANO-LX2 are listed in Chapter 2 .
To install a SO-DIMM into a SO-DIMM socket, please follow the steps below and refer
Figure 5-1 .
Figure 5-1: SO-DIMM Installation
Step 1: Locate the SO-DIMM socket . Place the NANO-LX2 on an anti-static pad with
the solder side facing up.
Step 2: Align the SO-DIMM with the socket . The SO-DIMM must be oriented in such a
way that the notch in the middle of the SO-DIMM must be aligned with the
plastic bridge in the socket.
Step 3: Insert the SO-DIMM . Push the SO-DIMM chip into the socket at an angle. (See
Figure 5-1 )