IEI Technology NANO-LX2 User Manual Download Page 176

Page: 176 / 183

NANO-LX2 EPIC NANO Motherboard

Page 160

Figure H-3: Sound Effects Manager (ALC655)

NOTE

The Sound Effect Manager shown in

Figure H-3

is for the Realtek

ALC655 audio Codec. Different Codecs may have different sound

manager appearances.

The following section describes the different configuration options in the Sound Effect

Manager.

H.2.2 Sound Effect Manager Configuration Options

The

Sound Effects Manager

enables configuration of the items listed below. To configure

these items click the corresponding menu tab in the

Sound Effects Manager

(

Figure H-3)

NOTE:

The Karaoke Mode is configured in the Sound Effect menu. To access

Karaoke configuration settings, click on the Sound Effect menu tab.

Summary of Contents for NANO-LX2
























































































































































































Search results

Summary of Contents for NANO-LX2

Reviews:

Related manuals for NANO-LX2

Brands by name

Popular brands

IEI Technology NANO-LX2, User Manual

Search results

Summary of Contents for NANO-LX2

Reviews:

Related manuals for NANO-LX2

Brands by name

Popular brands