IEI Technology NANO-LX2 User Manual Download Page 100

Page: 100 / 183

NANO-LX2 EPIC NANO Motherboard

Page 84

Total Memory

The

Total Memory

is NOT user configurable.

6.2.1 IDE Primary Master/Slave

Use the

IDE Primary Master/Slave

menu (BIOS Menu 3) to set or change the

master/slave IDE configurations.

BIOS Menu 3: IDE Channel Master

IDE HDD Auto-Detection [Press Enter]

Use the

IDE HDD Auto-Detection

option to enable BIOS to automatically detect the IDE

settings. Select

IDE HDD Auto-Detection

and press

NTER

BIOS automatically detects

the HDD type. Do not set this option manually.

IDE Primary Master [Auto]

Use the

IDE Primary Master

option to activate or deactivate the following drive channels:

Summary of Contents for NANO-LX2
























































































































































































Search results

Summary of Contents for NANO-LX2

Reviews:

Related manuals for NANO-LX2

Brands by name

Popular brands

IEI Technology NANO-LX2, User Manual

Search results

Summary of Contents for NANO-LX2

Reviews:

Related manuals for NANO-LX2

Brands by name

Popular brands