manualshive.com logo in svg

IEI Technology NANO-GX2, User Manual, Page: 4 / 172

Share
Download
IEI Technology NANO-GX2 User Manual Download Page 4

 

 

NANO-GX2 EPIC NANO Motherboard

Page iv 

Manual Conventions 

 WARNING! 

Warnings appear where overlooked details may cause damage to the equipment or result 

in personal injury. Warnings should be taken seriously. Warnings are easy to recognize. 

The word “warning” is written as “

WARNING

,” both capitalized and bold and is followed by 

text. The text is the warning message. A warning message is shown below: 

 WARNING: 

This is an example of a warning message. Failure to adhere to warning 

messages may result in permanent damage to the NANO-GX2 or 

personal injury to the user. Please take warning messages seriously. 

 CAUTION! 

Cautionary messages should also be heeded to help reduce the chance of losing data or 

damaging the NANO-GX2. Cautions are easy to recognize. The word “caution” is written 

as “

CAUTION

,” both capitalized and bold and is followed. The text is the cautionary 

message. A caution message is shown below: 

 CAUTION: 

This is an example of a caution message. Failure to adhere to cautions 

messages may result in permanent damage to the NANO-GX2. Please 

take caution messages seriously. 

Summary of Contents for NANO-GX2













































































































































































Reviews:

No comments