manualshive.com logo in svg

IEI Technology NANO-GX2, User Manual, Page: 124 / 172

Share
Download
IEI Technology NANO-GX2 User Manual Download Page 124

 

 

NANO-GX2 EPIC NANO Motherboard

Page 108 

7.1 Available Software Drivers 

 NOTE: 

The content of the CD may vary throughout the life cycle of the product 

and is subject to change without prior notice. You may visit the IEI 

website or contact technical support for the latest updates. 

The software drivers for the NANO-GX2 motherboard installed in the subsystem: 

 

7.2 VGA Driver

 

 

7.3 Audio Driver

 

 

7.4 LAN Driver

 

 

All five drivers can be found on the CD that came with the motherboard. To install the 

drivers please follow the instructions in the sections below. 

 NOTE: 

The installation instructions below are for systems running Windows 

XP. The Windows XP kernel may already contain some of these drivers 

and install them automatically when it detects the new hardware. 

7.2 VGA Driver 

 NOTE: 

The VGA driver installation instructions are for a system running 

Windows XP. 

To install the VGA driver, please follow the steps below. 

Step 1: 

Turn the system on. 

Summary of Contents for NANO-GX2













































































































































































Reviews:

No comments