IEI Technology NANO-GX2 User Manual Download Page 35

Page: 35 / 172

NANO-GX2 EPIC NANO Motherboard

Page 19

2.8 AMD Geode™ CS5536 System Chipset

The NANO-GX2 motherboard has an AMD Geode™ CS5536 chipset installed. The AMD

Geode™ CS5536 is a companion device for the AMD Geode™ GX 466 to create a

high-performance, low-power x86 solution for embedded applications.

Figure 2-10: System Chipset

Technical specifications of the AMD Geode™ CS5536 chipset are listed below. For more

information on these two chipsets, visit the AMD website.

GeodeLink™ Interface Unit

64-bit, 66 MHz operation

PCI VSM (Virtual System Module) that makes the interface transparent to

applications software and BIOS

Programmable routing descriptors, use and activity monitors, and SSMI

(Synchronous System Management Interrupt)

ATA-6 Controller

100 MB/second IDE Controller in UDMA mode per the ATA-6

specification

5V interface

Flash Interface

Multiplexed with IDE interface Connects to an array of industry standard

NAND Flash and/or NOR Flash

USB Controller

4 USB ports

Summary of Contents for NANO-GX2













































































































































































Search results

Summary of Contents for NANO-GX2

Reviews:

IEI Technology NANO-GX2, User Manual, Page: 35 / 172

Search results

Summary of Contents for NANO-GX2

Reviews: