IEI Technology NANO-GM45A2 User Manual Download Page 99

Page: 99 / 148

NANO-GM45A2 EPIC SBC

Page 87

Quick Boot [Enabled]

Use the

Quick Boot

BIOS option to make the computer speed up the boot process.

Disabled

No POST procedures are skipped

Enabled D

EFAULT

Some POST procedures are skipped to decrease

the system boot time

Quiet Boot [Enabled]

Use the

Quiet Boot

BIOS option to select the screen display when the system boots.

Disabled

Normal POST messages displayed

Enabled D

EFAULT

OEM Logo displayed instead of POST messages

AddOn ROM Display Mode [Force BIOS]

Use the

AddOn ROM Display Mode

option to allow add-on ROM (read-only memory)

messages to be displayed.

Force BIOS

EFAULT

The system forces third party BIOS to display

during system boot.

Keep Current

The system displays normal information during

system boot.

Bootup Num-Lock [On]

Use the

Bootup Num-Lock

BIOS option to specify if the number lock setting must be

modified during boot up.

Off

Does not enable the keyboard Number Lock automatically. To

use the 10-keys on the keyboard, press the Number Lock key

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard lights up when the Number

Lock is engaged.

Summary of Contents for NANO-GM45A2





















































































































































Search results

Summary of Contents for NANO-GM45A2

Reviews:

Related manuals for NANO-GM45A2

Brands by name

Popular brands

IEI Technology NANO-GM45A2, User Manual

Search results

Summary of Contents for NANO-GM45A2

Reviews:

Related manuals for NANO-GM45A2

Brands by name

Popular brands