IEI Technology NANO-GM45A2 User Manual Download Page 128

Page: 128 / 148

NANO-GM45A2 EPIC SBC

Page 116

B.4 Recovery Tool Functions

After completing the initial setup procedures as described above, users can access the

recovery tool by pressing <

> while booting up the system. The main menu of the

recovery tool is shown below.

Figure B-23: Recovery Tool Main Menu

The recovery tool has several functions including:

Factory Restore

: Restore the factory default image (iei.GHO) created in

Section B.2.4

Backup system

: Create a system backup image (iei_user.GHO) which will be

saved in the hidden partition.

Restore your last backup

: Restore the last system backup image

Manual

: Enter the Symantec Ghost window to configure manually.

Quit

: Exit the recovery tool and restart the system.

WARNING:

Please do not turn off the system power during the process of system

recovery or backup.

Summary of Contents for NANO-GM45A2





















































































































































Search results

Summary of Contents for NANO-GM45A2

Reviews:

IEI Technology NANO-GM45A2, User Manual, Page: 128 / 148

Search results

Summary of Contents for NANO-GM45A2

Reviews: