IEI Technology NANO-GM45A2-R10 User Manual Download Page 91

Page: 91 / 148

NANO-GM45A2 EPIC SBC

Page 79

USB Devices Enabled

The

USB Devices Enabled

field lists the USB devices that are enabled on the system

USB 2.0 Controller [Enabled]

Use the

USB 2.0 Controller

BIOS option is enabled.

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

Auto

Legacy USB support disabled if no USB devices are

connected

USB2.0 Controller Mode [HiSpeed]

Use the

USB2.0 Controller Mode

option to set the speed of the USB2.0 controller.

FullSpeed

The controller is capable of operating at 12 Mb/s

HiSpeed D

EFAULT

The controller is capable of operating at 480 Mb/s

5.3.6 Power Configuration

The

Power Configuration

menu (

BIOS Menu 10

) allows the advanced power

management options to be configured.

Summary of Contents for NANO-GM45A2-R10





















































































































































Search results

Summary of Contents for NANO-GM45A2-R10

Reviews:

Brands by name

Popular brands

IEI Technology NANO-GM45A2-R10, User Manual

Search results

Summary of Contents for NANO-GM45A2-R10

Reviews:

Brands by name

Popular brands