IEI Technology NANO-GM45A2-R10 User Manual Download Page 80

Page: 80 / 148

NANO-GM45A2 EPIC SBC

Page 68

Compatible D

EFAULT

Configures the on-board ATA/IDE controller to be in

compatible mode. In this mode, a SATA channel will

replace one of the IDE channels. This mode supports

up to 4 storage devices.

Enhanced

Configures the on-board ATA/IDE controller to be in

Enhanced mode. In this mode, IDE channels and SATA

channels are separated. This mode supports up to 6

storage devices. Some legacy OS do not support this

mode.

Configure SATA as [IDE]

Use the

Configure SATA as

option to configure SATA devices as normal IDE devices.

IDE D

EFAULT

Configures SATA devices as normal IDE device.

AHCI

Configures SATA devices as normal AHCI device.

IDE Master and IDE Slave

When entering setup, BIOS automatically detects the presence of IDE devices. BIOS

displays the status of the auto detected IDE devices. The following IDE devices are

detected and are shown in the

IDE Configuration

menu:

Primary

IDE

Master

Primary

IDE

Slave

Secondary IDE Master

Secondary IDE Slave

The

IDE Configuration

menu (

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section 5.3.2.1

appear.

Summary of Contents for NANO-GM45A2-R10





















































































































































Search results

Summary of Contents for NANO-GM45A2-R10

Reviews:

Brands by name

Popular brands

IEI Technology NANO-GM45A2-R10, User Manual

Search results

Summary of Contents for NANO-GM45A2-R10

Reviews:

Brands by name

Popular brands