manualshive.com logo in svg

IEI Technology NANO-GM45A2-R10, User Manual

Share
Download
IEI Technology NANO-GM45A2-R10 User Manual Download Page 117

 

 

NANO-GM45A2 EPIC SBC 

Page 105

 NOTE: 

Use the following commands to check if the partitions were created 

successfully. 

 

Step 5: 

Press any key to exit the recovery tool and automatically reboot the system. 

Please continue to the following procedure: Build-up Recovery Partition.

S

te

p

 0

:

 

B.2.3 Build-up Recovery Partition 

Step 1: 

Press any key to boot from the recovery CD. It will take a while to launch the 

recovery tool. Please be patient.   

Step 2: 

When the recovery tool setup menu appears, type <

2

> and press <Enter>. 

 

Figure B-4: System Configuration for Windows 

Step 3: 

The Symantec Ghost window appears and starts configuring the system to 

build-up a recovery partition. In this process, the partition which is created for 

Summary of Contents for NANO-GM45A2-R10





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands