IEI Technology NANO-ADL-P, User Manual

Page: 111 / 149

NANO-ADL-P
Page 111
➔
57600 Sets the serial port transmission speed at 57600.
➔
115200 D
EFAULT
Sets the serial port transmission speed at 115200.
➔ Data Bits [8]
Use the Data Bits option to specify the number of data bits.
➔
7 Sets the data bits at 7.
➔
8 D
EFAULT
Sets the data bits at 8.
➔ Parity [None]
Use the Parity option to specify the parity bit that can be sent with the data bits for detecting
the transmission errors.
➔
None D
EFAULT
No parity bit is sent with the data bits.
➔
Even The parity bit is 0 if the number of ones in the data
bits is even.
➔
Odd The parity bit is 0 if the number of ones in the data
bits is odd.
➔
Mark The parity bit is always 1. This option does not allow
for error detection.
➔
Space The parity bit is always 0. T This option does not allow
for error detection.
➔ Stop Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.
➔
1 D
EFAULT
Sets the number of stop bits at 1.
➔
2 Sets the number of stop bits at 2.