IEI Technology NANO-ADL-P, User Manual

Page: 69 / 149

NANO-ADL-P
Page 69
Mode Two: Using the Retainer
Step 1: Press the retainer down as shown below. (See Figure 4-3 )
Figure 4-3: Press the Retainer
Step 2: Line up the notch on the M.2 module with the notch on the slot. Slide the M.2
module into the socket at an angle of about 20º. (See Figure 4-1 )
Step 3: Align the notch on the end of the M.2 module with the clip of the retainer. (See
Step 4: Figure 4-4)
Figure 4-4: Aligning the M.2 Module with the Retainer