IEI Technology KINO-AQ170, User Manual

Page: 79 / 161

KINO-AQ170 Industrial Motherboard
Page 65
Figure 4-10: Securing the Full-size PCIe Mini Card
4.6.2 Half-size PCIe Mini Card Installation
To install a half-size PCIe Mini card, please follow the steps below.
Step 1: Locate the PCIe Mini card slot . See Chapter 3 .
Step 2: Remove the retention screw . See Figure 4-11 .
Figure 4-11: Removing Retention Screw
Step 3: Insert into the socket at an angle . Line up the notch on the card with the notch
on the slot. Slide the PCIe Mini card into the slot at an angle of about 20º
( Figure 4-12 ).