IEI Technology KINO-AH612 User Manual Download Page 107

Page: 107 / 165

KINO-AH612

Page 96

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset

Graphic

LAN

Audio

Installation instructions are given below.

6.2 Software Installation

All the drivers for the KINO-AH612 are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->My Computer->CD Drive->autorun.exe"

Step 2:

The driver main menu appears (

Figure 6-1

Summary of Contents for KINO-AH612






































































































































































Search results

Summary of Contents for KINO-AH612

Reviews:

Brands by name

Popular brands

IEI Technology KINO-AH612, User Manual

Search results

Summary of Contents for KINO-AH612

Reviews:

Brands by name

Popular brands