manualshive.com logo in svg

IEI Technology IVS-100-BT, User Manual, Page: 72 / 120

Share
Download
IEI Technology IVS-100-BT User Manual Download Page 72

 

 

IVS-100-BT Advanced Auto Data Server

Page 60 

 

Force 

BIOS 

D

EFAULT

 

Sets display mode to force BIOS. 

 

Keep 

Current 

 

Sets display mode to current. 

4.7 Save & Exit 

Use the 

Save & Exit

 menu (

BIOS Menu 19

) to load default BIOS values, optimal failsafe 

values and to save configuration changes. 

Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. 

Main 

Advanced 

Chipset 

Security

Boot 

Save & Exit 

 

Save Changes and Reset 

Discard Changes and Reset 

 

Restore Defaults 
Save as User Defaults 
Restore User Defaults 

 

 
Reset the system after 
saving the changes. 
 
--------------------- 

: Select Screen 

↑

 

↓

: Select Item 

Enter: Select 
+/-:  Change  Opt. 
F1: General 

Help 

F2: Previous 

Values 

F3: Optimized 

Defaults

F4:  Save & Exit 
ESC: Exit 
 

Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc. 

BIOS Menu 19: Exit 

 

Save Changes and Reset   

Use the 

Save Changes and Reset 

option to save the changes made to the BIOS options 

and reset the system. 

 

Discard Changes and Reset 

Use the 

Discard Changes and Reset 

option to exit the system without saving the 

changes made to the BIOS configuration setup program. 

Summary of Contents for IVS-100-BT

























































































































Reviews:

No comments