iSignager-800WL-N270 Digital Signage Player
Page 34
Step 6:
Gently pull the spring retainer clips of the SO-DIMM socket out and push the
rear of the DDR memory module down (
).
Step 7:
Release the spring retainer clips on the SO-DIMM socket. They clip into place
and secure the DDR memory module in the socket.
Step 0:
Figure 3-8: DDR SO-DIMM Module Installation
3.5.3 Internal CF Card Replacement
The iSignager-800WL-N270 series has one internal CF Type II slot on the motherboard.
To replace the CF card internally, follow the instructions below.
Step 1:
Follow all anti-static procedures
. See
Section 3.2
Step 2:
Turn off the power
. See
Section 3.3
Step 3:
Remove the top panel
. See
Section 3.4.1
.
Step 4:
Locate the CF card socket
.
