iSignager-800WL-N270 Digital Signage Player
Page 29
Only handle the edges of the PCB
: - When handling the PCB, hold the PCB
by the edges.
3.3 Turn off the Power
WARNING:
Failing to turn off the system before opening it can cause permanent
damage to the system and serious or fatal injury to the user.
Before any maintenance procedures are carried out on the system, make sure the system
is turned off.
3.4 Opening the System
3.4.1 Removing the Top Panel
To access the iSignager-800WL-N270 internally the top panel must be removed. To
remove the top panel, please follow the steps below.
Step 1:
Follow all anti-static procedures
. See
Section 3.2
Step 2:
Turn off the power
. See
Section 3.3
Step 3:
Remove the retention screws on both side panels
(
).
