iSignager-800WL-N270 Digital Signage Player
Page 12
2.1 Hardware Installation
2.1.1 iSignager-800WL-N270 Set-Up
To set up the iSignager-800WL-N270, follow the steps below:
Step 1:
Connect the player to the display device. Please refer to
Section 2.2
for
connection of various kinds of video and audio output signals. To be able to
configure various display devices, please install the iSignager AdMinistrator first
and add a new player in the player setting.
Step 2:
Install the TV card (refer to
) and connect video input to the player
(if available).
Step 3:
Connect the iSignager-800WL-N270 to the network.
LAN:
connect the LAN cable to the RJ-45 connector of the
iSignager-800WL-N270.
Wireless LAN:
connect the antenna to the antenna connectors of the
iSignager-800WL-N270.
Step 4:
Mount the iSignager-800WL-N270. (Refer to
Section 2.1.6
Step 5:
Connect the player to the power supply and turn on the iSignager-800WL-N270.
Step 0:
NOTE:
After the hardware installation, a formatted CF card/SD card with display
content and player settings generated by iSignager AdMinistrator has to be
installed in the iSignager-800WL-N270 for broadcasting.
