IEI Technology IMBA-XQ354 User Manual Download Page 141

Page: 141 / 245

IMBA-XQ354 Motherboard

Page 121



Power On

The system turns on



Last State

EFAULT

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.



Resume on Keyboard/Mouse [Disabled]

Use the

Resume on Keyboard/Mouse

BIOS option to enable activity on either the

keyboard or mouse to rouse the system from a suspend or standby state. That is, the

system is roused when the mouse is moved or a button on the keyboard is pressed.



Disabled D

EFAULT

Wake event not generated by activity on the

keyboard or mouse



Enabled

Wake event generated by activity on the keyboard or

mouse



Disabled D

EFAULT

Wake event not generated by an incoming call



Enabled

Wake event generated by an incoming call



Resume on PCI-Express WAKE# [Enabled]

Use the

Resume PCI-Express WAKE#

BIOS option to enable activity on the

PCI-Express WAKE# signal to rouse the system from a suspend or standby state.



Disabled

Wake event not generated by PCI-Express WAKE#

signal activity



Enabled D

EFAULT

Wake event generated by PCI-Express WAKE# signal

activity

Summary of Contents for IMBA-XQ354






















































































































































































































































Search results

Summary of Contents for IMBA-XQ354

Reviews:

Related manuals for IMBA-XQ354

Brands by name

Popular brands

IEI Technology IMBA-XQ354, User Manual

Search results

Summary of Contents for IMBA-XQ354

Reviews:

Related manuals for IMBA-XQ354

Brands by name

Popular brands