IEI Technology IMBA-Q870-i2 User Manual Download Page 93

Page: 93 / 186

IMBA-Q870-i2 ATX Motherboard

Page 77

Figure 4-20: HDMI Connection

Step 3:

Insert the HDMI connector.

Gently insert the HDMI connector. The connector

should engage with a gentle push. If the connector does not insert easily, check

again that the connector is aligned correctly, and that the connector is being

inserted with the right way up.

Step 0:

4.5.4 LAN Connection

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

Step 1:

Locate the RJ-45 connectors

. The locations of the USB connectors are shown

Chapter 3

Step 2:

Align the connectors.

Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the IMBA-Q870-i2. See

Figure 4-21

Summary of Contents for IMBA-Q870-i2



























































































































































































Search results

Summary of Contents for IMBA-Q870-i2

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-Q870-i2, User Manual

Search results

Summary of Contents for IMBA-Q870-i2

Reviews:

Brands by name

Popular brands