IEI Technology IMBA-Q870-i2 User Manual Download Page 148

Page: 148 / 186

IMBA-Q870-i2 ATX Motherboard

Page 132

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:



Chipset



Graphics



LAN



USB

3.0



Audio



Intel®

AMT

Installation instructions are given below.

6.2 Software Installation

All the drivers for the IMBA-Q870-i2 are on the CD that came with the system. To install

the drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->My Computer->CD Drive->autorun.exe"

Step 2:

The driver main menu appears (

Figure 6-1

Summary of Contents for IMBA-Q870-i2



























































































































































































Search results

Summary of Contents for IMBA-Q870-i2

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-Q870-i2, User Manual

Search results

Summary of Contents for IMBA-Q870-i2

Reviews:

Brands by name

Popular brands