manualshive.com logo in svg

IEI Technology IMBA-Q870-i2, User Manual

Share
Download
IEI Technology IMBA-Q870-i2 User Manual Download Page 164

 

 

IMBA-Q870-i2 ATX Motherboard

Page 148 

6.7 Audio Driver Installation 

To install the Realtek High Definition (HD) Audio driver, please follow the steps below. 

6.7.1 BIOS Setup 

Step 1: 

Enter the BIOS setup. To do this, reboot the system and press 

D

EL

 during POST. 

Step 2: 

Go to the PCH Azalia Configuration submenu. Enable the 

Azalia

 option. Refer 

to 

Section 5.4.1.2

. 

Step 3: 

Press 

F10

 

to save the changes and exit the BIOS setup. The system reboots.

Step 0:

 

6.7.2 Driver Installation 

To install the audio driver please follow the steps below. To install the audio driver, please 

do the following. 

Step 1: 

Access the driver list. (See 

Section 6.2

) 

Step 2: 

Click “

5-Audio

” and select the folder which corresponds to the operating 

system. 

Step 3: 

Double click the setup file. 

Step 4: 

The 

InstallShield Wizard

 is prepared to guide the user through the rest of the 

process. 

Step 5: 

Once initialized, the 

InstallShield Wizard

 welcome screen appears   

(

Figure 6-24

). 

Summary of Contents for IMBA-Q870-i2



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands