IEI Technology IMBA-Q670 User Manual Download Page 97

Page: 97 / 222

IMBA-Q670 ATX Motherboard

Page 79

Wake System with Fixed Time [Disabled]

Use the

Wake System with Fixed Time

option to specify the time the system should be

roused from a suspended state.

Disabled D

EFAULT

The real time clock (RTC) cannot generate a wake

event

Enabled

If selected, the following appears with values that

can be selected:

*Wake up every day

*Wake up date

*Wake up hour

*Wake up minute

*Wake up second

After setting the alarm, the computer turns itself on

from a suspend state when the alarm goes off.

5.3.3 Trusted Computing

Use the

Trusted Computing

menu (

BIOS Menu 5

) to configure settings related to the

Trusted Computing Group (TCG) Trusted Platform Module (TPM).

Summary of Contents for IMBA-Q670































































































































































































































Search results

Summary of Contents for IMBA-Q670

Reviews:

Related manuals for IMBA-Q670

Brands by name

Popular brands

IEI Technology IMBA-Q670, User Manual

Search results

Summary of Contents for IMBA-Q670

Reviews:

Related manuals for IMBA-Q670

Brands by name

Popular brands