IEI Technology IMBA-Q670 User Manual Download Page 133

Page: 133 / 222

IMBA-Q670 ATX Motherboard

Page 115

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset

Graphic

LAN

Audio

USB

3.0

Intel®

AMT

Intel® Management Engine Components driver

Intel® IT Director application

Installation instructions are given below.

6.2 Software Installation

All the drivers for the IMBA-Q670 are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->My Computer->CD Drive->autorun.exe"

Step 2:

The driver main menu appears (

Figure 6-1

Summary of Contents for IMBA-Q670































































































































































































































Search results

Summary of Contents for IMBA-Q670

Reviews:

Related manuals for IMBA-Q670

Brands by name

Popular brands

IEI Technology IMBA-Q670, User Manual

Search results

Summary of Contents for IMBA-Q670

Reviews:

Related manuals for IMBA-Q670

Brands by name

Popular brands