IEI Technology IMBA-H810 User Manual Download Page 64

Page: 64 / 169

IMBA-H810 ATX Motherboard

Page 50

3.3.1 Audio Connector

CN Label:

AUDIO_CV1

CN Type:

Audio jack

CN Location:

See

Figure 3-35

The audio jacks connect to external audio devices.

Line In port (Light Blue):

Connects a CD-ROM, DVD player, or other audio

devices.

Line Out port (Lime):

Connects to a headphone or a speaker. With

multi-channel configurations, this port can also connect to front speakers.

Microphone (Pink):

Connects a microphone.

Figure 3-36: Audio Connector

3.3.2 Ethernet and USB 2.0 Connectors

CN Label:

LAN2_USB2

CN Type:

RJ-45, USB 2.0

CN Location:

CN Pinouts:

and

Table 3-32

There are two external USB 2.0 connectors on the IMBA-H810.

Pin

Description

Pin

Description

VCC

USB_DATA-

Summary of Contents for IMBA-H810










































































































































































Search results

Summary of Contents for IMBA-H810

Reviews:

Related manuals for IMBA-H810

Brands by name

Popular brands

IEI Technology IMBA-H810, User Manual

Search results

Summary of Contents for IMBA-H810

Reviews:

Related manuals for IMBA-H810

Brands by name

Popular brands