IEI Technology IMBA-H110, User Manual

Page: 112 / 152

IMBA-H110 ATX Motherboard
Page 98

Mark The parity bit is always 1. This option does not
provide error detection.

Space The parity bit is always 0. This option does not
provide error detection.

Stop Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.

1 D
EFAULT
Sets the number of stop bits at 1.

2
Sets the number of stop bits at 2.
5.3.6.1 Legacy Console Redirection Settings
Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.
Advanced
Legacy Serial Redirection Port [COM1] Select a COM port to
display redirection of
Legacy OS and Legacy
OPROM Messages.
---------------------

: Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
BIOS Menu 12: Legacy Console Redirection Settings

Legacy Serial Redirection Port [COM1]
Use the Legacy Serial Redirection Port option to select a COM port to display redirection
of legacy OS and legacy OPROM messages.