IEI Technology IMBA-C604EP, User Manual

Page: 209 / 213

IMBA-C604EP ATX Server Board
Page 193
appear during the POST. Refer to the applicable BIOS configuration section in
this user manual.
Step 4: Save and Exit BIOS . After the SATA support option is enabled, save and exit
the BIOS.
Step 5: Reboot the system . Reboot the system after saving and exiting the BIOS.
Step 6: Press Ctrl+I. during the system boot process . Press Ctrl+I when prompted to
enter the RAID configuration software.
Step 7: Configure the RAID settings . Use the Intel® Matrix Storage Manager to
configure the RAID array. Brief descriptions of configuration options are given
below. S te p 0 :
F.4 Installing the Operating System to the RAID Array
To install the operating system to the RAID array some extra steps are necessary during
the installation process.
Step 1: Prepare a RAID driver floppy disk on another computer . If installing on the
RAID array a RAID driver floppy disk must be made. The RAID driver floppy disk
utility is on the CD in the “5-SATA/Floppy Configuration Utility” folder. The floppy
disk will be formatted and the drivers installed.
Step 2: Restart the system with a floppy drive attached . Attach a normal floppy drive
or USB floppy drive to the system.
Step 3: Press F6 when prompted . During the installation process, Windows OS
prompts the user to press F6 to install the RAID drivers. Press F6 and choose
from the drivers on the floppy disk.
Step 4: Install the OS . Continue with OS installation as usual. S te p 0 :