IEI Technology IMBA-C2060 User Manual Download Page 99

Page: 99 / 209

IMBA-C2060 ATX Motherboard

Page 83

Disable

Disables SATA devices.

IDE Mode

Configures SATA devices as normal IDE device.

AHCI Mode

EFAULT

Configures SATA devices as AHCI device.

RAID Mode

Configures SATA devices as RAID device.

Staggered Spin-up [Disabled]

Staggered Spin-up allows the system to power up one drive at a time to prevent excess

power consumption. Use the

Staggered Spin-up

option to enable or disable the

staggered spin-up function.

Disabled D

EFAULT

Disables staggered spin-up.

Enabled

Enables staggered spin-up.

External SATA Port [Disabled]

Use the

External SATA Port

option to enable or disable the external SATA port.

Disabled D

EFAULT

Disables the external SATA port.

Enabled

Enables the external SATA port.

Hot Plug [Disabled]

Use the

Hot Plug

option to enable or disable the hot plug function.

Disabled D

EFAULT

Disables the hot plug function.

Enabled

Enables the hot plug function.

5.3.5 Intel TXT(LT) Configuration

Use the

Intel TXT(LT) Configuration

menu to configure Intel Trusted Execution

Technology support.

Summary of Contents for IMBA-C2060


















































































































































































































Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-C2060, User Manual

Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands