IEI Technology IMBA-C2060 User Manual Download Page 166

Page: 166 / 209

IMBA-C2060 ATX Motherboard

Page 150

B.1.1 System Requirement

NOTE:

The recovery CD can only be used with IEI products. The software will

fail to run and a warning message will appear when used on non-IEI

hardware.

To create the system backup, the main storage device must be split into two partitions

(three partitions for Linux). The first partition will be for the operating system, while the

second partition will be invisible to the operating system and contain the backup made by

the one key recovery software.

The partition created for recovery images must be big enough to contain both the factory

default image and the user backup image. The size must be calculated before creating the

partitions. Please take the following table as a reference when calculating the size of the

partition.

OS Image after Ghost Compression Ratio

Windows® 7

7 GB

5 GB

70%

Windows® XPE

776 MB

560 MB

70%

Windows® CE 6.0

36 MB

28 MB

77%

Summary of Contents for IMBA-C2060


















































































































































































































Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-C2060, User Manual

Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands