IEI Technology IMBA-C2060 User Manual Download Page 26

Page: 26 / 209

IMBA-C2060 ATX Motherboard

Page 10

2.1 Anti-static Precautions

WARNING!

Static electricity can destroy certain electronics. Make sure to follow the

ESD precautions to prevent damage to the product, and injury to the

user.

Make sure to adhere to the following guidelines:

Wear an anti-static wristband

: Wearing an anti-static wristband can prevent

electrostatic discharge.

Self-grounding

: Touch a grounded conductor every few minutes to discharge

any excess static buildup.

Use an anti-static pad

: When configuring any circuit board, place it on an

anti-static mat.

Only handle the edges of the PCB

: Don't touch the surface of the

motherboard. Hold the motherboard by the edges when handling.

2.2 Unpacking Precautions

When the IMBA-C2060 is unpacked, please do the following:

Follow the antistatic guidelines above.

Make sure the packing box is facing upwards when opening.

Make sure all the packing list items are present.

Summary of Contents for IMBA-C2060


















































































































































































































Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-C2060, User Manual

Search results

Summary of Contents for IMBA-C2060

Reviews:

Brands by name

Popular brands