IEI Technology imba-30104 User Manual Download

Page: 175 / 185

IMBA-30104 ATX Motherboard

Page 161

NOTE:

The compatible items described here have been tested by the IEI R&D

team and found to be compatible with the IMBA-30104

F.1 Compatible Operating Systems

The following operating systems have been successfully run on the IMBA-30104.

MS-DOS

6.22

Microsoft Windows 2000

Microsoft Windows XP (32-bit)

Microsoft® Windows VISTA (32-bit)

Microsoft® Windows VISTA (64-bit)

Red

Hat

9.0

F.2 Compatible Processors

The following processors have been successfully tested on the IMBA-30104.

CPU

Speed

FSB

Tech

Intel® Core™2 Duo E2140

1.6 GHz

800 MHz

65 nm

Intel® Core™2 Duo E2160

1.8 GHz

800 MHz

65 nm

Intel® Core™2 Duo E2180

2.0 GHz

800 MHz

65 nm

Intel® Core™2 Duo E6420

2.13 GHz

1066 MHz

65 nm

Intel® Core™2 Duo E6700

2.66 GHz

1066 MHz

65 nm

Table F-1: Compatible Processors

Summary of Contents for imba-30104


























































































































































































Search results

Summary of Contents for imba-30104

Reviews:

Related manuals for imba-30104

Brands by name

Popular brands

IEI Technology imba-30104, User Manual

Search results

Summary of Contents for imba-30104

Reviews:

Related manuals for imba-30104

Brands by name

Popular brands