IEI Technology imba-30104 User Manual Download

Page: 24 / 185

IMBA-30104 ATX Motherboard

Page 10

2.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the

IMBA-30104 may result in permanent damage to the IMBA-30104 and

severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the IMBA-30104. Dry climates are especially susceptible to ESD. It is therefore

critical that whenever the IMBA-30104, or any other electrical component is handled, the

following anti-static precautions are strictly adhered to.

Wear an anti-static wristband

: - Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

Self-grounding

:- Before handling the board touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

Use an anti-static pad

: When configuring the IMBA-30104, place it on an

antic-static pad. This reduces the possibility of ESD damaging the

IMBA-30104.

Only handle the edges of the PCB

:-: When handling the PCB, hold the PCB

by the edges.

2.2 Unpacking Precautions

When the IMBA-30104 is unpacked, please do the following:

Follow the anti-static precautions outlined in

Section 2.1

Make sure the packing box is facing upwards so the IMBA-30104 does not fall

out of the box.

Make sure all the components shown in

Section

Error! Reference source not

found. are present.

Summary of Contents for imba-30104


























































































































































































Search results

Summary of Contents for imba-30104

Reviews:

Related manuals for imba-30104

Brands by name

Popular brands

IEI Technology imba-30104, User Manual

Search results

Summary of Contents for imba-30104

Reviews:

Related manuals for imba-30104

Brands by name

Popular brands