IEI Technology IDS-H61 User Manual Download Page 51

Page: 51 / 72

IDS-H61 Digital Signage Player

Page 41

WARNING:

Take Anti-Static precautions whenever maintenance is being carried out on the

system components. Failure to take anti-static precautions can cause

permanent system damage. For more details on anti-static precautions, please

refer to

Section

2.1

5.1 System Maintenance Overview

NOTE:

When doing maintenance operations on the system, please follow the

instructions in this chapter. Failure to follow these instructions may lead to

personal injury and system damage.

To preserve the working integrity of the IDS-H61, the system must be properly maintained.

If internal components need replacement, the proper maintenance procedures must be

followed to ensure the system can continue to operate normally.

5.2 Component Replacement Procedure

WARNING!

Users are not advised to attempt to repair or replace any internal or

external components of the IDS-H61 embedded system other than

those listed below. If any other components fail or need replacement,

contact the IEI reseller or vendor you purchased the IDS-H61 from or

contact an IEI sales representative directly. To contact an IEI sales

representative, please send an email to

[email protected]

The system components listed below can all be replaced if they fail:

Summary of Contents for IDS-H61









































































Search results

Summary of Contents for IDS-H61

Reviews:

Related manuals for IDS-H61

Brands by name

Popular brands

IEI Technology IDS-H61, User Manual

Search results

Summary of Contents for IDS-H61

Reviews:

Related manuals for IDS-H61

Brands by name

Popular brands