IEI Technology IDS-H61 User Manual Download Page 46

Page: 46 / 72

IDS-H61 Digital Signage Player

Page 36

On D

EFAULT

Allows the Number Lock on the keyboard to be

enabled automatically when the computer system

boots up. This allows the immediate use of the

10-key numeric keypad located on the right side of

the keyboard. To confirm this, the Number Lock LED

light on the keyboard is lit.

Off

Does not enable the keyboard Number Lock

automatically. To use the 10-keys on the keyboard,

press the Number Lock key located on the upper

left-hand corner of the 10-key pad. The Number

Lock LED on the keyboard lights up when the

Number Lock is engaged.

Quiet Boot [Disabled]

Use the

Quiet Boot

BIOS option to select the screen display when the system boots.

Disabled D

EFAULT

Normal POST messages displayed

Enabled

OEM Logo displayed instead of POST messages

Summary of Contents for IDS-H61









































































Search results

Summary of Contents for IDS-H61

Reviews:

Related manuals for IDS-H61

Brands by name

Popular brands

IEI Technology IDS-H61, User Manual

Search results

Summary of Contents for IDS-H61

Reviews:

Related manuals for IDS-H61

Brands by name

Popular brands